10ton Drinking Water Treatment Machine

• Customization: Available
• Type: Reverse Osmosis
• Usage: Environmental Protection
• Model NO.: WT-RO-10T
• Capacity: 10 T Per Hour
• Skid Frame: Ss304
• Membrane Elements: Hydranautics Cap3-8040
• Membrane Housings: Ss304
• Low Pressure Piping: Ss304
• High Pressure Piping: Ss304
• Name: 10ton Drinking Water Treatment Machine
• Transport Package: Export Wooden Case
• Specification: 10000LPH
• Trademark: BOWEI
• Origin: Wenzhou
• HS Code: 842121
• Production Capacity: 10t Per Hour

Product Description

10ton Drinking Water Treatment Machine

How the Reverse Osmosis System Works
A semi permeable membrane in a reverse osmosis system only allows certain things to pass through. This membrane
passes water easily but also prevents many other contaminants from passing by trapping them. Water is normally on
both sides of the membrane, the water on each side has a different concentration of dissolved minerals. The water in
the less concentrated solution tries to dilute the more concentrated solution. Water will pass through the membrane
from the lower concentration side to the greater concentration side. The osmotic pressure (see diagram) created by
the difference in water levels, will counter the diffusion process forming an equilibrium between the two sides.

Technical route and flow diagram instructions
The technical route is as following.
Raw tank-->Booster pump -->Quartz sand filter-->activated carbon filter--->Anti-scalant
Dosing-->Sediment filter-->High pressure pump-->RO desalination device-->Permeate tank

Features
Materials of Construction
Skid Frame: SS304
Membrane Elements: HYDRANAUTICS CAP3-8040
Membrane Housings: SS304
Low pressure piping: SS304
High pressure piping: SS304
Pump and Motor
Pump: 304SS vertical multi-stage centrifugal
Motor: TEFC, 380/460 VAC, 3-phase, 50/60 Hz.
Standard Features
8" x 40" High rejection membrane elements
5-micron sediment pre-filter housing
Automatic inlet solenoid valve
PLC control
Product water conductivity monitor
Operating pressure gauges
Product and concentrate flow meters
Concentrate and recycle flow control valves
Low inlet pressure switch with shutdown alarm
Auto/Manual wash
Optional Equipment Available
Atmospheric storage tanks with level control and repressurization pump
Pressurized storage vessels
UV
Ozone generator
Membrane clean-in-place (CIP) systems
Pretreatment chemical injection systems

Model  No	WT-RO-10T
Capacity	10000LPH(Liter per Hour)
Nominal Recovery	65-75%
Nominal Salt Rejection	99.60%
Operating Temperature	1 5°C -4 5°C
Design Temperature	25°C
Feed Pump	4.00KW
High Pressure Pump	11.00KW
Voltage	2 2 0V  / 380V / 460V - 50Hz / 60Hz